How do I know if I have a 42re transmission?

Look for the transmission part/identification number and date code. According to the 42RE service manual on Scribd.com, the codes are located on the driver’s side of the transmission, stamped just above the oil pan gasket surface. The first group is the assembly part number, followed by the manufacturing date.

What jeeps have 42RE transmission?

42RLE: Four-speed automatic transmission was available from 2003 to 2006 Jeep TJ Wrangler with 4.0L engines. 42RE: The 42RE four speed automatic transmission was used in 1993.3 to 1998 Jeep Grand Cherokees with 4.0L engines.

What cars have a 42RE transmission?

How Do I Order?

  • 1989-2003 Dodge Dakota.
  • 1998-2000 Dodge Durango.
  • 1989-2001 Dodge Ram pickup 150 / 1500.
  • 1989-2003 Dodge Ram Van B150 / B250.
  • 1993-2004 Jeep Grand Cherokee.
  • 1996-1998 Jeep Grand Cherokee 5.2 V8.

How do I know what transmission I have in my Jeep Cherokee?

Locate the plate.

  1. Lay on the ground on either side of the Jeep.
  2. Slide under the Jeep to the transmission which is bolted to the motor. Look for a metal plate attached to the transmission. The transmission number is located on the plate. It is the only number on the plate. EX. 42RE.
IT IS INTERESTING:  What is so good about a GSR transmission?

What does 42RE mean?

What does 42RE mean? The 42RH was a medium-duty transmission, while the 42RE was a heavy-duty version of the same transmission. They featured identical gear ratios, but the 42RE used electronic components to shift gears. The 42RH used a mechanical hydraulic system.

How do I identify my Jeep transmission?

The transmission in a Jeep is identified by an identification plate. This plate is stamped on the housing of the transmission and the location can vary, depending on the model year of your Jeep. The numbers on the identification plate provide the build date, part number and the build date.

How many gears does a 42RE have?

The Chrysler 42RE (A500SE) is a 4 speed automatic transmission. Mechanical and hydraulic components in the 42RE are similar to those found in the 42RH (A500) transmissions.

What does a 42RE transmission fit?

The 42RE was used in Dodge and Jeep applications from 1982 through 2004. 42RE is the first of its series to feature an electronically controlled overdrive. The A500 42RE was specifically designed for Dodge Ram, Dakota, Durango and Jeep Grand Cherokee vehicles with 3.9 and 4.0 liter engines.

How do I identify my Dodge transmission?

Transmission identification numbers are stamped on the driver side of the case flange just above the oil pan gasket (just below the TV lever). There will be a 9 digit part number, a space, a 4 digit build date, a space, and a 4 digit serial number. 6 = strength of trans. (1-9, higher number, stronger trans.)

How does a 42RE transmission work?

The 42RE used an electronic governor to control the transmission’s first through third gear bands, clutches, planetary gear sets and over-running clutch system. The 42RE’s fourth gear featured an overdrive clutch, the direct clutch, over-running clutch and the planetary gear system.

IT IS INTERESTING:  How much does it cost to have a bumper repainted?

How do I know if my Jeep has a CVT transmission?

A tell-tale sign of a CVT is this: When you accelerate watch your tachometer. As you accelerate with a regular geared transmission it will climb gradually and then suddenly drop as it changes gear. You should see this happen a few times (5 or 6 up to highway speeds is typical).

Does Jeep Cherokee have manual transmission?

Now, the Jeep Wrangler and the Jeep Gladiator are both current models. Say you want a Grand Cherokee with a manual transmission. … Fortunately, there are plenty of used Jeep models out there, many of which come outfitted with a stick-shift.

How much is a transmission for a Jeep Cherokee?

2020 Jeep Cherokee Transmission Cost

The cost of a new 2020 Jeep Cherokee transmission could be over $3,500 depending on the vehicle, however, transmission services such as fluid changes and a transmission fluid flush are considerably less expensive, in some cases costing less than $150.

How can you tell if a transmission is 42rh?

Look for the transmission part/identification number and date code. According to the 42RE service manual on Scribd.com, the codes are located on the driver’s side of the transmission, stamped just above the oil pan gasket surface. The first group is the assembly part number, followed by the manufacturing date.

What is a A518 transmission?

The A-518 is also known as a 46RH transmission and was used extensively by Chrysler in the early to mid- ’90s as a replacement for the A-727. It is the heavier-duty cousin of the A-500 overdrive, typically used behind V-6 engines in the mid-’90s.

IT IS INTERESTING:  Why should I service my car?

What is a 46RH transmission?

The 46RH transmission is a 4 speed automatic that comes out of the A518 family. It replaced the A727 and was preceded by the 46RE transmission starting on all 1996 models. The biggest improvement over the 727 was that it featured in overdrive.